o
CO
0')
~
Honda
NR500
secrets
revealed
These engine drawings - taken
from
a
Honda
patent
specification and obtained from
England's MotoT Cycle Weekly,
via their Japanne correspondent, Yori
Kanda
clearly refer to the
controversial Honda NR500 V-4 road
racer and substantially confirm the
basic configuration suggested in news
items last year.
That is to say, the cylinder bores are
greatly elongated ("oval" with straight
sides) and each head has four inlet and
four exhaust valves, in two parallel
rows, with two spark plugs - one in the
middle of each group of four valves.
The most offbeat feature of the
engine is the use of two connecting
rods (on a long, taper-bored gudgeon
pin) for each piston. This is a
precautionary measure to prevent
tilting of the pistons, since the
transverse cylinder axis is nearly 2 \-2
times as long as the fore-and-aft axis.
The seeming ovality of the valve
heads is an illusion, since they are
inclined to the cylinder axis. The
included angle is about 50 degrees narrow, but not so narrow as in some
advanced four strokes.
The ultra-shon stroke (36mm)
means a crank throw of I8mm (just
under ~ inch). As a result there is
substantial overlap of the main and
big-end journals, giving a very stiff
crankshaft. This seems to be made in
one piece with the central drive gear,
and to have six plain main bearings
and eight plain big ends.· The drive to
the double overhead camshafts is also
central.
Valve operation is conventional,
cam
with
hollow
cylindrical
followers and duplex coil return
springs. The long gradual taper in the
inlet tracts is clearly intended to
accelerate gas speed right up to the
flow obstruction prnented by the valve
heads.
•
Don't be caught:
without a
:
Cycle News HAT!:
•
Mail to: Cycle News Products
P.O. Box 498 Dept.10W10
Long Beach. Ca. 90801
Name
_
I
I
Address
City
_
State
Please send me
. . -(Red and White)
Zip
_
hausl at $6.95 each
~ Card expires
_
~~
~~ 1 each large &
small
Cycle News stickle with order
.."'"'Cltld
'if..d
II.. ItnOWl'I1 Ih