Cycle News

Cycle News 2017 Issue 05 February 7

Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles

Issue link: https://magazine.cyclenews.com/i/783081

Contents of this Issue

Navigation

Page 93 of 115

VOL. 54 ISSUE 5 FEBRUARY 7, 2017 P93 in corners—unusual for smaller machines. Being a BMW, the G 310 R comes standard with ABS. The two-channel system works exceptionally well, without any se- rious oscillation between the front and rear brakes as the system adeptly balances pressure under heavy braking, avoiding any hint of lock-up, even on loose sur- faces. The hardware consists of a single 300mm disc on the front grabbed by a four-piston caliper, while the rear end is handled by a single 240mm disc mated to two-piston caliper. Steel wrapped lines provide consistent feel and stable pressure, even under extreme application. The chassis is constructed of tubular steel, providing torsional rigidity with minimal flex, and is mated to a long swingarm (which helps grant the 310 its stability) that is suspended by a single shock with a progressively-wound spring that adequately renders a smooth ride in the early stages of compression, progressively stiffening with resistance as more shock travel is used. The shock is mounted directly to the swingarm and frame in a simple and clean design, sans any linkage. The system, which provides a claimed 5.15 inchesof travel, works well and never bottomed despite at- tempts to do so. For a small bike the 310 is fitted with somewhat beefy 41mm diameter forks that are anodized gold and mounted in an upside-down position. Triple clamps are beefy alloy units with plenty of grab on the forks—which provide a claimed 5.5-inches of travel. The front end works quite well, absorbing small bumps with ease while being capable of soak- ing up hard hits (such as divots and potholes) with equal aplomb. The factory settings give the 310 a very soft, plush ride at lower speeds, while manning up with increasing stiffness as the pace increases. Wheels are black, 17-inch 5-spoke die-cast alloy de- sign (3.0-inch width on the front and 4.0-inch width on the rear) and are shod with 110/70R and 150/60R rubber respectively. Specifications aside, the G 310 R is surprisingly fun to ride. Intent on reviewing the machine from the perspective of a begin- ning rider, I found myself flog- ging the bike around the back roads of Malibu with a great deal of enjoyment. The geometry of the frame, combined with a

Articles in this issue

Links on this page

Archives of this issue

view archives of Cycle News - Cycle News 2017 Issue 05 February 7