Cycle News

Cycle News 2026 Issue 44 November 3

Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles

Issue link: https://magazine.cyclenews.com/i/1547449

Contents of this Issue

Navigation

Page 127 of 129

VOLUME ISSUE NOVEMBER , P127 the corners…good straight-line stability. It was hard to get into any situation where the Cooper enduro would do you in." The Be- tor forks and Boge shocks were good, as were the brakes, though they "went away when wet and took a fairly long time to dry out." The clutch was also finicky when the engine was warm, but the correct adjustment fixed it. American Frank Cooper conceived the Cooper, and he had been involved in distribut- ing Maico in the U.S. He con- tracted with the Moto Islo moped manufacturer in Saltillo, Mexico, to build his motorcycles. Cooper borrowed technology from Sachs and Yamaha and even enlisted Malcolm Smith's help with the engine design. These were good names in the motorcycle indus- try, and on paper, that should have been enough for Frank to sell a bunch of motorcycles in the early '70s. Few things are harder than starting a new motorcycle com- pany, especially in North Ameri- ca. And though Frank had a fine first effort, later models began to have quality-control issues. In a story for another day, Cooper eventually became motorcycles called Ammex, an effort spear- headed by three-time National MX champ Gary Jones. And then it was no more. But no motorcycle is ever fully dead, as long as wingnuts like Iowa racer Jack Randleman own a fine example of a Cooper MX bike. "It was really a basket case, more of a parts bike," Randle- man says. "But it had the original fiberglass number plates, and I think those are probably the rarest and hardest parts to find. I got my fenders from a friend I made in Mexico. We used Google Translate for months, and ultimately, I traded a bunch of parts he couldn't get for his Honda projects, and he sent me the fenders. "I have no clue why I started my obsession with the Cooper. I love the story, the concept of a bike made in North America to compete against the European bikes, where you could get parts/ repairs much faster. It's interest- ing that even back then there was this 'Made in Mexico' men- tality. I like that it's a rather rare bike but pretty much worthless to collectors." Nuts to the collectors! Frank didn't build his motorcycle for them anyway. He built his bike to ride and marketed it as some- thing truly different. A dirt bike you could ride on the street, even if you had to mix the oil and gasoline, was something to be thankful for. Viva Frank Cooper! CN Subscribe to more than 60 years of Cycle News Archives issues: www.CycleNews.com/Archives (Above) Cooper Motorcycles got its name from American Frank Cooper, the motorcycle's founder. (Below) Iowan Jack Randleman restored this Cooper 250, not just to look at, but to ride.

Articles in this issue

Links on this page

Archives of this issue

view archives of Cycle News - Cycle News 2026 Issue 44 November 3