Cycle News

Cycle News 2026 Issue 30 July 28

Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles

Issue link: https://magazine.cyclenews.com/i/1545985

Contents of this Issue

Navigation

Page 127 of 131

distinguishing one mo- tocross bike brand from another. Swap out their many plastic parts, and it would be nearly impos- sible. It was a different story in the 1970s, when motorcycle manufactur- ers were designing and testing from original ideas. And no machine looked more like itself than the DKW Hornet with its springer front end. "On rough, cobby stuff," CN wrote, "…any telescopic [fork] will transmit the up-and-down jolts to the hands. The springer front- end doesn't. The movement of the springer fork is a fairly slow, dampened back-and-forth mo - tion in the horizontal plane, which is much easier to hold onto at speed. Stories that they are not as precise in tracking are, for 95 percent of all riders, nonsense. You stick the springer DKW into a corner and hold it on a line, and it stays there." CN refers to the "springer DKW" because it also tested the conventionally forked Hor - net in the same story. The DKW springer model sold for $829, while the Hornet with Betor front suspensions could be yours for $859. Aside from the front-wheel suspension (and a painted stripe on the fuel tank), the two bikes were identical. The CN crew loved the powerplants on the German bikes. They were one- kick starters and never fouled a spark plug. A six-speed transmis - sion was well-spaced, helping the little DKW produce a claimed 24 horsepower. "There is probably more to be gotten out of it," wrote CN, before admonishing the reader to "leave it alone." Great performance and "han- dling that cannot be faulted." The only noted grievances were the stock paper air filter and the rubber cover on the gearshift lever. A rubber-covered gearshift lever on a motocross bike is another reminder that, along with a kickstand and chromed fend- ers, motocross bikes have come a long way. Though faster and stronger, they certainly aren't as user-friendly as they once were. DKW (des Knaben Wunsch, meaning "the boy's wish") was once the world's largest manufac- turer of two-stroke motorcycles, and its three-cylinder engines were even used to power DKW automobiles. When World War II came along, being on the losing side cost the company one of its smaller-engine designs, with both the United States (Harley- Davidson) and Great Britain (BSA) awarded the rights to the motor, which ultimately became the Hummer (Harley) and the Bantam (BSA). In the mid-'60s, Sachs ac- quired DKW, and Sachs engines began appearing in other brands' lineups. This same issue of Cycle News featured a test of a Swed- ish motorcycle called a Monark, powered by what appears to be the very same two-stroke found in the DKW. Aprilia, Penton (KTM), and Her- cules motorcycles all have at least one root in the Sachs/DKW tree, and the 125 Hornet earned its place in MX history, giving young MX'ers a competitive mount in the small-bike class. Ooh la la! The boy's wish, indeed. CN The DKW was a decent motocross bike at the time but had a short lifespan. VOLUME ISSUE JULY , P127 Subscribe to more than 60 years of Cycle News Archives issues: www.CycleNews.com/Archives

Articles in this issue

Links on this page

Archives of this issue

view archives of Cycle News - Cycle News 2026 Issue 30 July 28