Cycle News

Cycle News 2024 Issue 31 August 6

Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles

Issue link: https://magazine.cyclenews.com/i/1524889

Contents of this Issue

Navigation

Page 125 of 145

VOLUME ISSUE AUGUST , P125 shield plus VAS-A system inte- grated into the shell. The shield, now available in tinted and mir- rored finishes from Arai, follows the contour of the shell using an "optically correct constantly changing radius." The Pinlock insert fits into a cavity on the inside of the shield. Versatility is the XD-5's game and its three configurations of use around the peak, shield and off-road goggles can be set with your bare hands. No tools required. Ventilation is claimed to have increased significantly, with 200 percent more airflow coming in the chin vent, which is twice as big as the XD-4's. A higher intake vent behind the logo on the front of the helmet aids flow up top. The XD-5's new peak/visor is built for maximum airflow, too. Comfort is set with an odor- resistant liner and communi - cation convenience is built in to the XD-5 via a re-sculpted Hyper-Ridge with a flatter surface for mounting a device. Internally, speaker pockets in the ears and pre-installed hook- and-loop make speaker install easier and a wire channel in the neck roll ensures connections stay out of sight. The Arai XD-5 tested here in the Discovery Black Frost graphic and with Cardo's Pack - talk Edge speakers, wiring and mount installed (but no de- vice) weighs 1814 grams/3.99 pounds. amount of energy sent directly into the helmet to be absorbed. The XD-5 is built to these same standards. The XD-5 is designed to be the ultimate multi-purpose helmet. Not just for ADV use, Arai says the helmet can shift from off-road to street and excel in all. It starts this task by featuring an all-new shell and shield layout for the XD family, built to increase smooth shell surface area in critical impact zones above the pivot point for the shield by 20mm – Arai calls this the VAS-A system. The entire helmet shape is more egg-shaped on the exterior while keeping its Intermediate Oval interior shape/fit. The entry to the helmet is roomier with a wider bottom chin and is 5mm wider at the cheek pads. Arai's interior liner is finely adjustable via cheek, temple, and crown peel-away comfort pads. There are also seven different thick - nesses of cheek pads available from 15mm to 40mm. The obvious visual update here is the all-new off-road inspired peak and MaxVision Off-road mode, engaged. Maximum aero for street miles.

Articles in this issue

Links on this page

Archives of this issue

view archives of Cycle News - Cycle News 2024 Issue 31 August 6