Cycle News - Archive Issues - 2000's

Cycle News 2002 05 22

Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles

Issue link: https://magazine.cyclenews.com/i/128155

Contents of this Issue

Navigation

Page 32 of 105

East Ulest Works Enduro Rider: Great Meadows, New Jersey Along with the WER shock bladder we used on the suspension, ISDE legend Drew Smith sent a couple of other parts that we gladly bolted up. The soft OEM aluminum rearwheel spacers on the KTM were replaced with anodized WER spacers ($32.95). which feature a steel bushing for longer life. The WER skid plate ($89.95) also was a welcome addition, and its perfect fit was a pleasant surprise. Skid plates are often difficult to install, leaving your motorcycle resembling something out of a Mad Max movie, but not the WER unit, which bolted up snugly to the KTM's frame and added additional protection for the exposed water pump without sticking out like a sore thumb. It served its purpose many times throughout the Laughlin HS. 906/637-6365 Exceptional Suspension Products: Tqjunga, California WER has developed a solid reputation with its eastem suspension work, but for laughlin, we figured we would tum to George Capodieci of lesser-known Exceptional Suspension Products. Capodieci tuned Jimmy Lewis' Laughlin-winning bike while at Scott's Performance Products in Montrose, California, and has since gone on to start his own business. The update was somewhat of an east-west combination, as the first thing Capodieci did was install the WER shock bladder ($65.95), which replaces the stock WP piston, prOViding better initial response by reducing stiction. Capodieci then revalved the WP fork ($145) and shock ($165) for better bottoming resistance, using the stock springs. Besides secret stacks of washers, one of ESP's weapons is the Honda HP5 fork oil it uses in every fork. Ours was set with 140mrn of air gap. 816/951-9144 Enduro Engineering: lansing, Michigan Back in the day, Drew Smith and Aland Randt were fierce competitors in gnarly offroad races. The tradition continues today, as Randt (who may be best known as the ONCC Industry Race sandbagger or Mike Lafferty's mechanic) currently runs Enduro Engineering, which goes up against Smith's WER in a friendly off-road aftermarket rivalry. Working as the head of EE's R&D department is three-time National Enduro Champion Mike Lafferty, who might Just be the toughest man in the world next to Lance Armstrong. The Laughlin course traverses fields of cholla cactus, and nothing smarts worse than cholla needles in your hand (except, perhaps, cholla needles in your crotch). Enduro Engineering doesn't produce a crotch protector, but Randt was able to help out with the handguard issue. EE's latest handguard ($55.95) features a traditional-style aluminum bar with a newly designed plastic brushguard ($24.95) up front. Not only do the guards keep needles at bay (from your hands, anyway), but they look trick enough that they drew compliments on more than one occasion (the same cannot be said of Ty Davis' homemade extensions). Behind the left handguard, we added a replacement dutch lever ($39.95) that uses a needle-bearing pivot to ease the pull of the Magura hydraulic clutch. The pricey piece is quite slim (the advantages of which we still haven't determined) and the pull seemed smoother and easier. Still, we're not completely sold, as we also tried it on a KTM 400 MXC and found that fatigue continued to be an issue. In contrast, there's no doubt as to the benefit of the Enduro Engineering clutch slave-cylinder protector ($31.95) that mounts in front of the countershaft sprocket. It's a must-have. 517/393-2421 E-Une: East Wareham, Massachusetts Kevin Hines and E-Line are known for several contribu· tions to the off-road world, including the distribution of the Honda CRE line of motorcycles into the United States. Hines, a former National Enduro Champion himself, now has a welldeveloped line of carbon-fiber armor for many makes of motorcycles. E-Iine also sells high-output lighting systems, but since Casey folks and the Best In The Desert organizers pull stragglers off the course before dusk, we figured a carbon-fiber pipe guard ($114.95) for our stock pipe would be the best choice. Coincidentally, we slammed our newly protected pipe into a rock while testing the blke a week prior to the Laughlin HS. The result was a sUver-dollar-sized scab on the carbon fiber, but the actual pipe escaped unscathed. 506/295-0612 K·Style: Amherst, Ohio To spruce up the appearance of our project bike, we applied a set of radiator-shroud graphics from K-Style, which Is KTM's in-house accessory line of hard parts. K-Style makes complete graphic kits for KTMs, but we opted for an aftermarket seat cover from another company. 440/965-3553 Kenda: ReynOldsburg, Ohio Prior to heading to Laughlin, we mounted up a set of Kenda tires. Hold on, we know what you're saying: "Kenda tires for a rough race?" Well, these aren't your father's Kenda tiresl Most of us know Kenda as the manufacturer of affordable and economical rubber, but they recently stepped up and Introduced two new race-worthy tires. The Carlsbad and Unadilla share the same quality as those of the bigger tire companies. Is you might surmise from its name, the Carlsbad is for hard and slippery surfaces, while the Unadilla is for muddy, sandy or loamy conditions. Due to the deep sand of the Laughlin area, we opted for the Unadilla ($50 front, $62 rear) and were pleasantly surprised with its performance and durability. Sure, the back tire chunked a little, but after 156 miles of Laughlin, that was true for almost everyone (escaping Laughlin without a flat is a major accomplishment in itself). Overall, it appears the combination of the Carlsbad front with the Unadilla rear might provide the best all-around package. These are definitely a good choice for someone looking for an economical tire that has long life and good handling characteristics. designed to cover the entire off-road range, from enduro to desert to grand prix, and it can even handle a little motocross now and then. True, the 200 may not be the best choice if you're going for the overall, but it's (perfect for the 125cc, 200cc, 250cc or Vet classes. For the testing ground, we chose the Laughlin Hare Scrambles, which is a part of Casey Folks' Best in the Desert Silver State Series. The event is pure old-school, rough-and-tumble desert racing, featuring terrain very similar to that of the old Wickenburg National Enduro, which was held just down the road. This is the most technical desert race you're likely to find. In fact, Jimmy Lewis won the 1991 event overall on a KTM 125 (this was before it was a team race, and Lewis claims that it was "really tough" back then). We figured the Laughlin Hare Scrambles was the perfect testbed for our east-meets-west KTM 200 MXC. Given the considerable list of accessories compiled (see sidebars), the one thing that really stands out is the ease of installation. Aftermarket parts used to be representative of the cut-to-fit, paint-to-match mentality, but these companies show that this is GPR: San Femando, California Another must-have for off-road competition is a steering stabilizer, and there are more on the market now than ever. We've been using a OPR unit ($350) lately that we're happy with for a few reasons. First off, it functions quite well, and secondly, GPR offers an attractive contingency program that the others don't. Owner and long-time desert-racer Randy Norman is another one of those guys that has developed his product out of years of experience, and he has obviously had his handlebar yanked out of his grasp at 70 mph by a rock more than a few times. The GPR unit worked wonders for our arms and for the bike's handling. 600/284-6473 BRP: Laguna Hills, california While we were installing the GPR stabilizer, we decided to bolt it up to a BRP triple damp ($189.99), which indudes the handlebar damp. With the BRP damp, you can bolt the stabilizer right on (non-stabilizer damps are also available), and you can choose from any of the three stock handlebar positions on the KTM damp. Although we settled for Just the upper clamp, BRP also offers a combination upper and lower that reduces traU on the KTM by 2mm (stock offset is 20mm). BRP says this puts more weight on front wheel, allowing the bike to push less and steer better. 949/360-1160 Motobed: Huntington Beach, California In keeping on the carbon-fiber theme started by the E-L1ne pipe guard, we installed MotoHed's carbon frame guards ($89), which have an abrasjve "grip" coating. The guards protect the frame and theoretically allow better interface between a rider's ankles and the bike. 677-667-6433 Guts: Diamond Springs, california The stock KTM seat cover allows moisture to seep between the clear coating and the MXC logo_ This looks bad, especially when the water begins to mildew, so when this happened, we wrapped our seat foam in an aftermarket cover. Although we used K-Style graphics, we decided to go with a Guts cover ($65.90) that we already had. It has survived numerous crashes and looks great. 530/642-9116 Team Motowest: Anaheim, California There were still a few more details to see in finishing off our project bike. Team Motowest In Anaheim runs factory-supported off-road efforts for Gas Gas and TM, and owner Steve Marolda was glad to prOVide some of the products that his race team uses, including a Tsubaki O-ring chain, DP brake pads and Silkoiene lubricants, all of which did the trick. 714/671-0167 no longer the case. The quality and fit of everything was very good, with the sole glitch being the fit of one frame guard. Certainly, this was just a fluke, as we have seen these installed on many other bikes with no problems. After building the bike, we could no longer put off the inevitable. It was time to go racing. Given how easy it is to build an off-road race bike with all the expertise of the aftermarket, it sure is hard to build one that two riders can agree on. The Laughlin Hare Scrambles team event is one of those that you really have to experience to understand how fun it can be and how tough it can be, depending upon what kind of day you and your teammate are having. We ended up with a suspension, handlebar and lever setup that neither rider could come to terms with, but that's what happens sometimes when David and Goliath team up. Our initial lofty expectations were quickly cue' e revised to two more realistic goals to finish and to have fun. Happily, both were accomplished, albeit with much pain and suffering. Said pain and suffering couldn't be attributed to the bike, which performed flawlessly. Our setup problems were confined to suspension settings and handlebar and lever position, and after the Laughlin Hare Scrambles, our suspension company (ESP) was kind enough to retune both ends for the preferences of one rider. Since then, the busy little 200 MXC competed in a National Hare & Hound, a WORCS race, a District 37 Big Six Grand Prix and a couple of local Enduros. The durability of all the products tested has been excellent, and more importantly, they all worked together in harmony. Now, if we could only get the off-road racers and promoters themselves to do that, this would truly be a great country. eN n e _ S • MAY 22, 2002 33

Articles in this issue

Archives of this issue

view archives of Cycle News - Archive Issues - 2000's - Cycle News 2002 05 22