Cycle News is a weekly magazine that covers all aspects of motorcycling including Supercross, Motocross and MotoGP as well as new motorcycles
Issue link: https://magazine.cyclenews.com/i/126536
more- ounces of Daeco or your favorite flavor gas at $5.751 gal. Trick engine stuff, right? Naw. Just stock Maico stuff, and accessories built by a company called Wheebmith Motorcycles, which specializes in the big "M" marque, and I don't mean Matchless. To add "flywheel effect" to the engine for throttle control and rraction purposes, I added an older triplex clutch basket and primary chain. I also added an enduro type external rotor flywheel after the Santa Fe National and will test it at the Peoria TT National. Standard Maico parts. Wheelsmith Motorcycles makes a motOCTOllll pipe for the 490 which allows the engine to buzz out a bit further. Spencer (Rod, not Mike or F~die) ran it at Santa Fe. It works! Believe me, it flat jump! on the pumpl Jerry Branch of Branch Flowmerrics ran it on his new trick dyno with all sorts of whatchamacallit printouts, and the results left both of us kind of slack-jawed to say the least. Briefly the results were as below. (Ascot downpipe was crashed and wouldn't tum past 7,OOOrpm.) Can you dig 5% ~ hp on a motor with no port work or rrick carbureton? It's too easy. Wheelsmith also did a clutch mod for me which added plates to the clutch, strengthening it (not sure it needed it) and softening it at the same time (it SUf'e needed it). I made some jetting changes to the carburetor to better suit the Wheelstnith pipe, but I'll test it at Peoria before dropping the numben on you. Last, I removed the freon-cell S&.W shocks used at Ascot. I replaced them with the older model 0-5 S&Ws using 70-pound srraight rate springs. Much better. For some reason, the Knight frame with its leverage ratio does not take well to the more stiffly-damped freon cell model H-5. The H-5, however, works fine on the Shell Frame, the Champion Frame and the Harley Frame. Also on the test grid for Peoria is a set of Works Performance shocks. They've been on two 'IT National winnen this year. They also pay contingency money. So there you have it. More from the land of the un-trick. Hank Scott was so impressed by the Maico at Santa Fe, rumor has it, that he's going to dump his Honda thumper and build ... a Husky TT bike. Is there no shame? Dirt rraclr. is baclr.! • Suppliers SteYe Ston Performance 9344 010 An., "J" Chauworth, CA 9151 I ZU/99!-lJ4lJO Brakes, forks, dyno work, etc. Rocky Cycle Co., Inc. ·P.O. Box 1451 Sunnyvale, CA 94086 408/754-5750 DYNAMIC TDJOOL SWEEPS NAT'L QUALIFIER Our liquid-cooled 100cc motocrosser captured the top 4 positions at the Baja Acres In this case, wheels. But they have nearly everything. Wheelamith Motorcycles 18020 Euclid Fountain Valley, CA 92708 714/751-0680 If you're serious about the 100cc classthis bike is for you! Motocross pipe and Maico engine mods, including porting, etc. Knight Racing Frames 25155 O'Neil Ave. Hayward, CA 94544 415/582-1555 Raised footpegs and shorter swingarm ' for Knight/Maico 490 frame. 100cc Schoolboy' National Qualifier on July 25, 1981 DAILY UPS SERVICE Team Dynamic 3732 Rochester Road Troy, MI48084 3131689-8006 23

